Help Contents |
Close this window |
As of DSpace 1.2, many administration tools can now be accessed via the regular DSpace UI. However, they only appear if you are logged in as an administrator. The easiest way to do this is to go to your 'My DSpace' page.
Some tasks must be performed entrally using the administration user interface, part of the Web UI. To access the administration UI, enter the base URL of your DSpace followed by /dspace-admin, for example:
https://dspace.myu.edu/dspace-admin
You will need to authenticate as an administrator to be able to access the page. Then, click on the relevant tool on the left-hand navigation bar.
TODO
To create a sub-community, go to the community home page of the community that is to be the parent of the new sub-community. Then, click on the 'Create sub-community' in the 'Admin Tools' box at the top right-hand corner of the page. This will create the new community and take you to the 'Edit Community' page for that community.
Creating a collection is done with a 'wizard' style tool that should be familiar to most people who've used modern operating systems user interfaces. It's rather similar to the submission interface in DSpace.
Note: You cannot add new e-people records with this wizard. All the e-person records must be loaded into the system first. However, you will be able to add more e-people to each group associated with the collection later if required.
To create a collection, ensure you're logged in, go to the community home page for the community in which the collection is to appear, and click 'Create Collection' on the top-right hand corner of the page. This will start the wizard.
The first page of the wizard will ask you some questions about the new collection. Check those that apply and click on the 'Next >' button. Note that after you've completed the wizard, you will be able to edit the collection later, so decisions you make here are not permanent.
However, also note that this wizard is a little less polished than the submission UI, which basically means there are no 'back' buttons, so if you want to change something you entered on one page after clicking 'next', you need to finish the wizard and then go back and edit the collection.
When you have completed the wizard, you're dropped into the Edit Collection screen. This allows you to review what you've entered and make any necessary tweaks.
Note 1: If the New items should be publicly readable option is checked, it means that new items arriving via the submission UI or batch importer will, by default, will get anonymous READ permissions for both the item and all the bitstreams). You can change this later so that e.g. items get anonymous READ permissions but bitstreams do not. Items that are 'mapped' or included from other collections will not have their authorizations changed.
Note 2: New items should be publicly readable is just a default; an item's permissions may later changed.
Note 3: If New items should be publicly readable is not checked, you will be asked later in the wizard who is allowed to read new items. Again, this is just a default, and can be changed later.
The next page allows you to fill in some basic information about the collection. The Name, Short Description and Introductory Text fields are mandatory, the others are not. (Note that the wizard is not strict, however, and will not enforce this.)
Copyright Text is simply text that will appear at the bottom of the collection's home page.
License is the deposit license (the license that submitters must grant when they submit an item) for this collection. This overrides the site default (which is stored in [dspace]/config/default.license and must be edited by a systems adminstrator). If you leave this field blank, the site default license is used.
Provenance is a free-text field you can put any provenance information in you feel like. It is not visible to end-users.
Depending on the boxes you checked on the first page of the wizard, you will go through a number of screens asking you which e-people can or should perform which actions, for example who submit, and who should perform the accept/reject submission workflow step. These pages work exactly the same as the group editor. Click 'Next >' when you have selected all the e-people to appear in the relevant permissions group.
Note: You cannot add new e-people records with this wizard. All the e-person records must be loaded into the system first. You can add more e-people to each group later if required.
On this screen you can specify some Dublin Core values that new submissions will have pre-filled out. Some of the values you can set here do not appear in the submission UI, so end-users may not have the chance to edit them. This can be a good or a bad thing! (FIXME?) Also note that these Dublin Core values will be added to items imported via the batch importer.
Use this tool to register e-mail addresses and other information about people you wish to authorize to play a role in the system, either as submitters, administrators, submission workflow participants, subscribers, or users with permissions to read restricted content.
Users can also get onto this list by self-registering (if the site configuration allows this). This does not give them any authorization, however. All people you wish to add to a group for submitter or workflow authorization must first be registered here.
To register someone, click on the Add EPerson button and add their information.
If the user will be logging in with a password, do not check Can Log In as this informs the system the user has a registered, active account, which isn't the case for a new e-person--they'll need to register using the UI to set a password first.
The 'require certificate' checkbox is used by MIT's X509 certificate authenticator. Ignore this unless you are using the MITAuthenticator authenticator.
If you check 'require certificate', you may also check 'can log in'. This means the user can log straight in with their certificate without registering. If you want users to go through the registration process (so that they enter their name etc.) then do not check 'can log in'.
Click on Save Edits when done.
Click on the Select EPeople... button to get a pop-up list of e-people in the system. The links at the top and bottom of the pop-up let you page through the list. You can also sort the list by e-mail address, last name or ID by clicking on the relevant column heading. On the left of each e-person in the list is a 'select' button. Click this next to the relevant e-person, and the pop-up will close and the e-person will appear in the box on the main 'Adminster EPeople' page. Now you can click the 'edit' or 'delete' buttons which let you edit information about a user or to delete them from the system.
Use this section to create, edit and delete groups of e-persons who can be authorized for specific functions in the system.
The 'Anonymous' group is a 'special' group that represents every person using the system. This group exists so that authorization policies can be specified for anonymous access ('everyone in the world can read this item').
Members of the 'Administrator' group are allowed to perform any action in the system, so be careful who you put in this group!
Other groups can be used for a variety of purposes. Groups may represent e-people who are allowed to submit to a particular collection; e-people who are responsible for performing a particular workflow step such as reviewing incoming submissions; or groups of e-people who have permission to access some restricted content. Information about what each group is allowed to do is controlled using the authorization section.
Groups can have names. Names automatically created by the system follow a convention depending on the what the group is for. The general form of this is:
OBJECTTYPE_OBJECTID_ACTION
For example, the group of e-people who are authorized to submit to collection XYZ would be called:
COLLECTION_XYZ_ADD
Note that XYZ in this case is the internal ID (the database primary key) of the collection, rather than the Handle. You can find out the internal ID of a collection or community by clicking on 'Communities/collections'. The second number in brackets beside a community or collection name is that object's internal ID.
It is recommended that you follow this convention for manually created groups so it's easy to find the group you need. The admin UI will automatically create groups for workflow steps, but you need to create groups for submitters manually.
To manually create a group, click on Create New Group. Change the default group name at top to desired name and click on Update Name.
Instructions for using the group editor
Use this tool to edit, withdraw or delete an item. You can enter an item's Handle or internal ID (database primary key) into the relevant box. Alternatively, you may find it easier to go to the relevant item's display page and then click the Edit button on the page which appears if you're logged in as an administrator.
Instructions for editing items
Instructions for withdrawing items
Note that the 'expunge' function will expunge the item and its metadata from the system without leaving a trace. Note that this functionality hasn't been fully tested (and it's not recommended), so there may be problems. For example, since there's no record of the deletion, the fact that the item has been deleted isn't exposed to OAI harvesters.
Select Supervisors in the administration area and you are presented with three options:
The sections below detail how to deal with common supervision order tasks.
Note: The option to Clean Supervision Order Database should be used once in a while just to perform basic maintenance operations on the database. It is completely automatic and takes a very short time to execute.
Select View Current Supervision Orders and you are presented with a list of all supervision orders currently in effect. From this page you can modify the policies for the supervision order or remove the supervision order. (see the sections below).
The details you have on this page allow you to see the name of the group doing the supervising, the author of the item being supervised and the title of that item.
You may also add a supervision order from this page as per the section Adding Supervision Orders below.
Select Add a Supervision Order from either the main supervision order page or the Current Supervision Orders page.
To set a supervision order you need to define the group to do the supervising and the item in the workspace to be supervised. In addition, this page gives you the option to set a default set of policies for the supervising group to have over the item.
Select the desired group from the pull down list of groups on this page; this box contains all the groups that currently exist on the system. Next select the WorkSpace item to be Supervised. This means clicking on the round select box on the right of the item in the listing you can see on this page, which shows all items currently in user workspaces.
Note: the ID that is in the left hand column of the item listing is the database id for the workspace item, and is there for the reference of system administrators.
Once you have chosen the group and the workspace item to be connected you may also select a default policy from the Initial Policy Setting pull down box. The default policy options that this provides are:
Once happy with your selection click on Submit Supervision Order and your settings will be applied, and you will be returned to the supervision order main page.
Go to the View Current Supervision Orders page and select Remove from the supervision order that to wish to remove. You will be asked to confirm the removal of the order, upon confirmation of which it will be removed from the system.
Go to the View Current Supervision Orders page and select Policies for the supervision order for which you would like to customise the policies. You will be taken to the Policies for Item page. From here you may customise the policies for the particular item.
In order to set policies for the supervisor group you should select, for example, Add New Policy for the item or any of its component parts, then select the supervisor group that you are wanting to configure from the given list of groups. You can then select the Action that you want to perform and hit Save Policy.
DSpace uses a qualified version of the Dublin Core schema based on the Dublin Core Libraries Working Group Application Profile (LAP). This registry provides a list of the elements and qualifiers, with comments.
You can edit the registry to suit your needs with this tool, but note that:
date.available for OAI harvesting, and title for the item display and search index. You can change the scope notes for these but you shouldn't change or remove the element or qualifier. To see which elements/qualifiers are used by the system, check out the [dspace-source]/config/registries/dublin-core.xml file.Also note that the dublin-core-types.xml is only used during the build process to populate the Dublin Core registry in the database, which is the 'live' version. Changes you make with this UI will only be reflected in the database registry, and not the XML file (and vice versa.)
This list of bitstreams provides information about known bitstreams and their support level. You can edit or add new bitstream formats with this tool. Please take note of the following:
Also note that the config/registries/bitstream-formats.xml is only used during the build process to populate the format registry in the database, which is the 'live' version. Changes you make with this UI will only be reflected in the database registry, and not the XML file (and vice versa.)
Use this tool to clear out workflows that have been abandoned and will never be completed.
This section is used to set specific authorization policies for communities, collections, and items. In order for users to perform an action on an object, they must have permission; DSpace operates a 'default deny' policy. Permissions do not 'commute'; for example, if an e-person has READ permission on an item, they might not necessarily have READ permission on the bundles and bitstreams in that item.
Use this tool to authorize collection-related groups to perform their roles.
Note:
Newly-submitted items accepted into a collection inherit the DEFAULT_ITEM_READ and DEFAULT_BITSTREAM_READ authorization policies associated with the collection, which become the READ policies for the item and its bitstreams. However, if you change a collection's default policies after items have been accepted, policies for existing items will not be changed automatically. You would have to change the permissions on those items using the Advanced Policy Admin Tool to make them accessible.
All collections must have an ADD policy for a submitter group, or else no one will be able to submit items to the collection.
This tool allows you to edit a community's policies in much the same way as a collection's are edited, described above.
Presently, since administration is done centrally, this tool doesn't have a lot of use--usually you will just add READ permission for the Anonymous group just after you create a community, and leave it at that. This permission is applied to the community's logo if there is one, which allows people to see the logo when they go to the community home page.
A community's policies are set to a default Anonymous READ.
This tool allows you to edit the policies for individual items. When you wish an item's policies to be different from those of the rest of those in a collection, you can use the item policy editor to customize the policies. It is a good practice long term management of a collection however, for all of the items in a collection to share the same authorizations.
Use this tool to set and clear policies for items or bitstreams across a whole collection. Be careful about using the Clear Policies button.
Select the collection from the top list and the group you want to give or remove permission for from the bottom list. Then select the type of object (item or bistream) that you want to edit permissions for. Then select the action from the drop-down.
For example, say you wanted to give everyone in a group 'privileged_users' Read access to all of the bitstreams in a restricted collection. You'd select 'privileged users' from the top list, 'bitstream' from the 'content type' drop-down, 'privileged_users' from the 'group' list, 'Read' from the 'action' drop-down, and click 'Add policy'.
You can use this tool to edit the text ("news") in two places on the DSpace home page: the top box of the center frame, and the right sidebar.
After clicking on "Edit News" on the admin menu, click on the Edit button next to the news item you wish to edit. A text box will be displayed with the current news, which can be deleted or modified by typing directly in the box. You can use HTML tags to format the text, but note that the html won't be validated here.